Mikrotron MC132x Especificaciones Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Initial setup MC132x Users Manual Rev. 0.23
5 Initial setup
The MC132x is delivered with initial parameters and therefore does not need to be configured via the
serial link.
5.1 Serial number and firmware revision
Serial number and firmware revision is provided in MC132x non volatile memory. Use :v command
(Read serial number and firmware revision) to read serial number and firmware revision. The serial
number is also marked on the type plate of the camera.
5.2 PowerUpProfile
The PowerUpProfile is the setting of all registers, which is loaded from non-volatile memory during
power-up and software reset. The content of the PowerUpProfile is loaded into the Camera Profile.
5.3 Camera Profile
The actual set of parameters is called Camera Profile. All changes of parameters by the serial link is
reflected in the Camera Profile. The Camera Profile can be saved to 8 user profiles or one
PowerUpProfile by command. It is loaded from 8 user profiles or 8 factory profiles or the
PowerUpProfile. The camera profile is volatile and must be stored to the PowerUpProfile to be reacti-
vated on next power up or software reset.
5.4 Factory profile
The factory profile can be read but not written by the user. They are factory preset to the settings of ta-
ble below.
Profil-Nr. Resolution
in pixel
Data width per
Pixel
in bit
Frame rate
in fps
Video data
width
in Mbyte/s
0 100 x 100 8 4.852 48,5
1 240 x 240 8 1.011 58,2
2 640 x 480 8 202 62,1
3 1280 x 1024 8 47 61,6
4 640 x 480 8 202 62,1
5 1280 x 1024 8 47 61,6
6 640 x 480 10 48 28,1
7 1280 x 1024 10 23 57,5
Table 5-1
5.5 User profile
The user can store up to eight User profiles in non volatile memory. All load or write commands ex-
change data between the PowerUpProfile and one of the four user profiles. The user profiles are factory
preset to the factory profiles.
12
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Comentarios a estos manuales

Sin comentarios