Mikrotron MC132x Especificaciones descargar pdf (Pagina 39)

Technical Data MC132x Users Manual Rev. 0.22

9.4 Frequency selection

Depending on the selected line length and the datarate of the GigE interface the frequency selection

table can provide an optimal ratio of sensor /pixel clock. The pixel clock is only dependent on the

selected step and not on the linelength.

The sensor clock is dependent on both the selected step, the line length and the data width. The tables

show the selectable frequencies and the correponding codes to program the synthesizer accordingly.

9.4.1 Table of clock frequency codes

For free programming of the clock frequencies of pixel and sensor clock the following table can be

used. All codes in the table show the code for sensor clock. The code for pixel clock is the same but

starts with “6”.

Example: Adjustment 1 MHz

Command for sensor clock: :S41bb0b

Command for pixel clock: :S61bb0b

Pixel and sensor clock must be adjusted in dependence of the used camera mode as described

in chapter frequency selection. Undefined settings may lead to functional faults or can dam-

age the camera.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45

Sin comentarios

Mikrotron MC132x Especificaciones Pagina 39