Mikrotron EOSENS GE CAMERA Especificaciones descargar pdf (Pagina 16)

Configuration EoSens GE Camera Manual

6.2.3 Invert readout in x- and or y-direction, commands: ReverseX, ReverseY

Commands: ReverseX, ReverseY

Description: This feature allows to flip the frame in x- and or y-direction.

Remark: This mode can not be combined with Decimation mode or MultiROI mode.

6.2.4 DecimationXY mode (Subsampling), command: DecimationXY

Command: DecimationXY off ; on

Description: With this feature enabled the sensor skips every other row and column.

Therefore the maximum width is 640 pixel and the maximum height is 512

pixel. The advantage is that a lens with the same focal distance can cover

the identical image size but with a higher framerate.

Note: A ROI of 640x512 covers the whole sensor area and equals the repro-

duction scale of 1280x1024 in normal mode. Switching on/off this mode

halves/doubles the output image size.

Limitation: The ROI x-start position should be zero because else the internal FPN

correction does not work correct. If a x-start position >0 is needed the

internal FPN correction should be turned off. If necessary a correction

must be done in software.

Remark: This mode can not be combined with ReverseX/Y mode or MultiROI

mode.

original used pixels output

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Sin comentarios

Mikrotron EOSENS GE CAMERA Especificaciones Pagina 16